300 Mbps Outdoor Wireless Bridge. 4.9 GHz to 5.8 GHz Fixed and Mobile Wireless Outdoor Bridges for voice, data and video distribution. Proven, reliable and fast outdoor wireless video solutions for ITS, transportation, and Surveillance Applications. Have a Question? Ask an Expert
Call: 1-408-776-2846

AIRAYA SearchContact AIRAYAWhere to Buy AIRAYA Outdoor Wireless ProductsAIRAYA Outdoor Wireless Success StoriesOrdering Guide
AIRAYA Customer Support
18434 Technology Drive
Morgan Hill, CA 95037

Customer Support Desk
Hours of Operation
U.S., Latin America, Canada, Europe
Monday-Friday 8:00am-5:00pm PST
Toll free: 1-866-224-7292 x84
Tel: 1-408-776-2846 x207
Fax: 1-408-776-3339
Support Email support@airaya.com

Enter article # or keyword(s)

AIRAYA Knowledgebase WirelessGRID WG-300S Radios (187 Mbps)

WirelessGRID WG-300S Network Settings Tab
Article # 401
Title WirelessGRID WG-300S Network Settings Tab
Abstract WirelessGRID-300 Network Settings Tab - How to COnfigure Network Settings on a WirelessGRID-300 Outdoor Wireless Network Bridge
  Help Topics - WirelessGRID-300 Wired Network Configuration Quick LinksScreen Shot

This tab is used to enter or update the IP address, subnet, and default gateway settings of a bridge. Important Note:  After changing network settings, write them down in a log so you can find them for future use.

Wired Network Configuration:

  IP Address. The IP address for each bridge must be both valid and unique, so please check with the network administrator for the correct IP address to be assigned to this device. The format of an IP address is a 32-bit numeric address written as four values separated by periods. Each value can be zero to 255. Note: The updated IP address will replace the default IP address of the system. After activating your changes with the "Reboot" button, you can access the bridge web interface by specifying the updated IP address.

  Subnet Mask. The subnet mask allows networking software to determine which parts of the IP address specify the network address and which parts specify the host address. If your device is using the wrong subnet mask for the network to which you are attached, it will therefore not be able to communicate with all users on that network. The factory programmed subnet mask of the bridge is

  Default Gateway Address. IP packets destined for other subnets are automatically sent to the default gateway, which routes the traffic to the correct network. The gateway address must be specified following the same convention as the IP address.

Follow these steps to update the Wired Network Configuration:

  1. Update the appropriate fields.
  2. Click Update.
  3. Wait for updating to complete.
  4. Click Reboot to make the changes effective.

Helpful Information
Contact Support Ask a question  Toll Free: 1(866) 224-7292 x84, International: 1(408) 776-2846 x207
Ordering Guide AIRAYA Ordering Guide - Online
Related Information 1
Registration Register Products
Warranty Info View Warranty Policy
This article has been viewed 13655 times
© 2018 AIRAYA