| 1. Enter the distance between 2 locations (in miles)
km |
2. Select AIRAYA channel band to be used in this installation.
|
3.
Review required clearance(in ft.) - This is the minimum antenna height above obstacles required at
the mid-point of a link to successfully setup and maintain a high-quality WirelessGRID link.
Both
fresnel zone and the bulge of the earth are calculated in this result. |
| 4. Buildings, trees, hills, and other obstacles
along the path may obstruct the Radio Line of Sight. Enter the three most
significant obstructions and their distances from the mid-point of your
link below to calculate the minimum clearance required and estimated
antenna height at each end. After entering obstructions, an
estimate of antenna heights will be presented
below.
|
| 1 -
Enter
height of tallest obstructions (ft.)
|
2 -
Distance from either end of the link to
middle of link (1/2 the link distance).
| 3 - Height of antennas required to keep
clear "Radio Line
of Sight".
|
|
Obstruction 2 - height (ft.)
|
Distance from one end to middle of link
|
Clearance
|
|
Obstruction 3 - height (ft.)
|
Distance from one end to middle of link
|
Clearance
|
| Estimated antenna height above
ground level taking the above obstructions into consideration
(Ft) - Site A |
|
| Estimated antenna height above
ground level taking the above obstructions into
consideration(Ft) - Site B |
Review
products now - Tip: make sure you select an AI108 link that has
long enough cables to cover antenna height and cable passage into your
building. |