AI108-4958 Wireless Bridge Kit - Data sheet | Buy demo kit

The complete AI108-4958-kit is designed for use anywhere that fast and affordable wireless bridging between 2 sites is required.  Utilizing 802.11a hardware technology and proprietary bridging software, the AI108-4958 provides up to 35 Mbps of actual throughput for multipoint and building-to-building communication utilizing 4.94-4.99, 5.25-5.35, 5.47-5.72, and 5.725-5.85 GHz.

Upgrade from 802.11B bridge links and increase your capacity by 5x. You gain the capacity you need and can still use your 802.11B bridge as a backup link, because the AI108 (4.94-4.99, 5.25-5.35, 5.47-5.72, 5.725-5.85 GHz) and 802.11B (2.4-2.4835 GHz) bridges do not interfere with each other. 

The AI108-4958-Kit includes:

• 2 Units AI108-4958-N indoor bridge (w/N-type female connectors)
• 2 Units 25 ft. LMR-400 RF cable (w/N-type male connectors)
• 2 Units AI108-2-23 outdoor antenna (23 dBi panel antenna w/N-type female connectors and mounting brackets)
  

Features include:

• Simple to use web configuration and management utility
• Distance tested: Over 5 miles under FCC/IC regulatory rules. (To 30 miles where local regulations allow)
• Antenna Alignment: Real-time RSSi (Signal to Noise) Signal Monitor for Antenna Alignment and Link Quality
• Real-time statistics: Monitor Bridge Status, Data Rate, Packet Error Rate (PER), RSSi (stats and graphing), and more...
• SecureRF Security : Proprietary WirelessGRID Protocol, WirelessGRID bridge authentication. AES data encryption
• Channel Size: 40, 20, 10, 5 MHz wide
• Non-overlapping 4.94-4.99 GHz Channels: (Part 70 Public Safety) 4 x 20 MHz, 2 x 40 MHz, 4 x 10 MHz, 8 x 5 MHz
• Non-overlapping 5.25-5.35 GHz Channels: (FCC, IC, Mexico, Poland) 19 x 5 MHz, 9 x 10 MHz, 4 x 20 MHz, 2 x 40 MHz
• Non-overlapping 5.47-5.72 GHz Channels: (ETSI, FCC, ITU) with TPC and DFS. 44 x 5 MHz, 22 x 10 MHz, 11 x 20 MHz, 5 x 40 MHz
• Non-overlapping 5.725-5.850 GHz Channels: (UNII/ISM Bands-ETSI, FCC, MII, RA, Mexico) 5 x 20 MHz, 2 x 40 MHz
• Modes: 108, 96, 72, 54, 48, 36, 24, 18, 12, 9, 6 Mbps or Auto
• Radio Transmit Output Power: 0 and 21 dBm. Supports Transmit Power Control and Dynamic Frequency Selection where required
• Receive Sensitivity: between -73 to -91 dBm depending on mode of operation
• Modulation: 64QAM, 16QAM, QPSK, and BPSK modulation
• VPN Support : for Ethernet tagged frames (802.1q, 802.1p, and VPN)
• AC Power Supply (100-120 AC, 50-60Hz input. 5 Volt, 2 Amp output, Bridge Connector: 2.1mm Coax - Center pin positive.  220v option available
• LED diagnostics: For power, network link/activity, radio link/activity monitoring

Retail price per kit:  $1699.00 U.S. 

For more information or to find out where to purchase this product, send an email to info@airaya.com

Note:  Requires Professional Installation by an AIRAYA authorized reseller (USA and Canada).